OPTIMUM Series

PG160, PG225
& PG300

SDI’s NEW low profile sprayers with fiberglass tank and durable
piston-diaphragm pump for exclusive use on the John Deere®
ProGator® 2020 and 2030 Utility Vehicles.

PG225 equipped with the EC-VM400 (SDI’s “Motorized” Boom Controls with Metered-By-Pass Feature) and OTB15-21/20-3 (SDI’s Optimum “Convertible” Turf Boom with Triple Nozzle Bodies)

 
 

EZ access to engine area using hydraulic lift cylinder.

Optional EZ on/off mounting using “Quick
Stand” Sprayer Storage System.

 

Top mounted pump and system controls
allow EZ access for system adjustments
and maintenance.

  Specifications OPTIMUM PG160 OPTIMUM PG225 OPTIMUM PG300
  Fiberglass Tank 160 Gallons 225 Gallons 300 Gallons
  Sprayer Dimensions 72”L x 54”W x 22”H 72”L x 54”W x 24”H 72”L x 54”W x 24”H
  Dry Weight 265 lbs. 300 lbs. 300 lbs.
  Agitation V-6 Hydro-Mix Jet V-6 Hydro-Mix Jet V-6 Hydro-Mix Jet
  Spray Pump 3 Diaphragms
with Damper
3 Diaphragms
with Damper
3 Diaphragms
with Damper
  Pump Regulator Micrometer Adj.
0–200 PSI
Micrometer Adj.
0–200 PSI
Micrometer Adj.
0–200 PSI
  Pump Power Auxiliary Hydraulics Auxiliary Hydraulics Auxiliary Hydraulics
  Standard Color Shamrock Green Shamrock Green Shamrock Green
  ProGator Mounting 3-Pin System 3-Pin System 3-Pin System*

* Please note: For 300 gallon model sprayer, ProGator vehicle requires heavy duty suspension and ROPS Kit (kit now available only from John Deere).

 

Special Features:

Pin mounts exclusively to the ProGator 2020 & 2030 Utility Vehicles in less than five minutes. Uses two utility box hinge pins and one hydraulic lift cylinder pin for easy attachment (using optional "Quick Stand").

Custom molded low profile fiberglass tank has SDI Shamrock Green gel coat with UV protection. Unique convex tank bottom design forces spray solution to outer gutters and into the rear mounted deep sump (excellent for low solution levels and hilly terrain conditions).

300 gallon model features tank anti-surge baffles.

16" screw-in filler opening is offset to the passenger's side of the tank for easy loading of spray solution (only 47" from ground to lid opening).

Unique tank top rear recess houses diaphragm pump and system controls for easy access and adjustments.

Three cylinder hydraulic drive piston-diaphragm spray pump with built-in pulsation damper. Easily handles all spray chemicals including abrasive wettable powders, aggressive iron formulas and even tracker dyes. The unique design even allows the pump to be run without spray solution (dry) with no damage to the pump’s diaphragms or mechanical components.

Maximum system pressure of 200 PSI allows the use of a hand gun for trees and shrubs or the use of a "Walking Spray Boom" at the end of 200' of 1/2" spray hose.

SDI's "V-6 Hydro-Mix" six venturi-jet agitation with ceramic metering orifice discs provides high performance hydraulic agitation throughout the solution tank.

Daily vehicle maintenance is enhanced by the sprayer's design and mounting. Use of the hydraulic lift cylinder raises front the of sprayer to access the engine compartment and the open design makes battery service easy, too!

Select from a wide variety of custom accessories to complete your Optimum sprayer package - manual, motorized, or Raven computerized boom controls - Economy, Optimum, or Shielded Spray Boom - reel, hose, and spray guns - walking spray booms - as well as other user friendly goodies to personalize the system to your needs.
 
Download PDF